Special nano sand mill series for separator/battery coating slurry

Introduction:

Suitable for fine grinding of various new nanomaterials. It is the most ideal model in the electrode material industry. Its unique discharging method ensures the quality and safety of the product. stability. For materials with medium and high viscosity, it has considerable advantages. The discharge screen is placed at the rear, which solves the problem of easy clogging and difficult cleaning when discharging. The entire grinding chamber is easy to disassemble and clean.

Features:

1. Motor: permanent magnet synchronous motor/three-phase asynchronous motor

2. Transmission mode: The motor drives the pulley for transmission

3. Discharge method: centrifugal discharge

4. Grinding and dispersion structure: Rod pin type

5. Cooling method: The grinding barrel is cooled by double-layer cooling water circulation, and the machine seal coolant is cooled by an auxiliary ring

6. Control system: The human-machine interface is independently controlled, with material temperature, pressure control, cooling water temperature; machine seal liquid level pressure , temperature, liquid level control; real-time monitoring of motor temperature

7. Sound and light prompts: When a sensor detects an abnormality in the grinder, the grinder will stop running, the sound and light alarm will alarm, and the human-machine interface will Detailed alarm information is prompted

8. Grinding chamber: inner cylinder silicon carbide

9. Features: narrow particle size distribution, high efficiency, ultra-low energy consumption

Technical parameters: